Training simulation using illustrative parameters. No connection to live equipment.

Pitch hydraulic simulator

Explore pump, unloading circuit and accumulator response. Compare pressure and motion under different injected faults.
Operating mode
Power
Speed 10×
Fault presets
Presets

Fault injection

① Station precharge loss Training parameters 170 bar
② Reduced hub precharge Training parameters 120 bar
③ System leakage1.0×
④ Pump capacity100%
 Intermittent supplyOff

Simulated SCADA metrics (rolling 10 min)

MetricSimulation
Hydraulic circuit · live view

Scroll horizontally to inspect circuit details; choose Fit diagram to see the full circuit.

Quick guide · three steps
  1. Select operating regulation, emergency feathering or another mode.
  2. Adjust teaching parameters for accumulators, leakage or supply.
  3. Compare pressure, motion and stored energy; pause to inspect the response.

Piston and oil intake · per cycle

ΔV = C · Δp C = Line + Station storage + 0.1·Hub storage Cᵢ = Vᵢ·p₀ᵢ / p² Cycle ≈ C × pressure band / consumption